| Kategorie | : | Aihasd |
| Listenpreis | : | |
| Preis | : |  |
| Verfgbarkeit | : | Versandfertig in 24 Stunden Frderfhige Fr Kostenloser Versand |
Note:
The tester for lithium and sealed lead acid batteries Universal, the factory settings for 24V lead acid batteries and voltage display cycle, if you need to other Specifications Test can be reset by itself, total have 6 steps is below:
1.
Pull the white buttons on the reverse for approx. 3s, until it shows "1-U" and Let Go. You can to your back for 1s it shows, "2-b" and Let Go. You can to your back for more 1S it shows, "3-C "and Let Go. You can to your back for more 1S it shows, "4-d".
2.
Second when it shows "1-U, remove the white button for 3 seconds, then you can Voltage ADMeasuring equipment. Draw it comes for a longer periods of time, easing tension in the. Drag it then for one for a long time, the voltage is down. Do it again and again. Conveniently store and end automatically after the onscreen sparkle.
3.
when it will show "2-B" allows you to make the type of the battery to change.
12 V: 1pc 12 V sealed lead acid batteries
3.7 V: 1pc 3.7 V Lithium Polymer Battery
3.2 V: 1pc 3.2 V lithium iron phosphate battery
1.2 V: 1pc 1.2 V NiMh battery and forget about costly and wasteful disposable batteries
4.
Adjust if it shows "3-C", you can, the number of batteries.Please to the following include:
12 V sealed lead acid battery: 1-8PCS
Battery: 3.7 V150 mAh Li-polymer Battery: 2-28PCS
3.2 V Lithium Iron Phosphate battery: 3-32PCS
1.2 V NiMh battery and forget about costly and wasteful disposable batteries: 10-70pcs
5.
If It shows "4-d", allows you to make the display mode. "V" is voltage mode. "% is% mode. "V% is the voltage & percent cycle mode.
6.
After each adjustment value is set, wait until the screen flicker is automatically saved and exitedand then you can to the next operation, otherwise the new adjustment value will not be saved!
Package include:
1 x 24V Sureblei batterien voltmeterFeatures
- For use with a case, easy to stand alone or embedded in of the plate to your product.
- Display Mode: Rechargeable battery and voltage, battery +% Ualer. Black Wire Connect negative electrode. Red wire connect positive
- Working Current: < 5-15 mA (with backlight). Power resolution: 1% Voltmeter accuracy: 1% use temperature range: -20 - 70 Humidity: 10% - 80%
- Outer dimensions: 4.6 x 2.7 x 1.7 cm/1.81 x 1.06 x 0.67
- Please note: This universal Tester for Lithium and sealed lead acid batteries, the factory settings for 24 V Lead Acid Batteries and voltage cycle indication, if you must be can be adjusted to lie close New test other specifications.
